G Fan Shaft Support

Description: Allis Chalmers reproduction fan support (fan end) with bearing SN# 800420 pressed in. Comes orange.

Item #: KI-1119

Fits: G

Replaces: 800416

Price: $74.00

WD, WD45, & D17 Stainless Steel Brake Pin (Pair)

Equipment Wedge

Description: Allis Chalmers reproduction 3/8" thick X 6" long. 1-3/16" taper to 5/8". Comes primered.

Item #: KI-1112

Fits:

Replaces:

Price: $25.00

CA Platform

Description: Allis Chalmers reproduction CA platform. Comes primed.

Item #: KI-1120

Fits: CA
Replaces: 225261

Price: $295.00

CA Lever Assembly Hitch Release

Description: Allis Chalmers reproduction lever assembly hitch release. Comes primered.

Item #: KI-1075

Fits: CA
Replaces: 226673

Price: $66.00

Description: Allis Chalmers reproduction throttle rod pin control rod. Comes natural finish.

Item #: KI-1125

Fits: B, C, CA, & IB

Replaces: PIN-235812, SCREW-903807

Price: $19.00

B,C,&G Hydraulic Cylinder Kit (Small)

Description: Allis Chalmers reproduction hydraulic kit (small). Cylinder and gland nut must be enlarged to .750. Made of high grade stainless steel.

Item #: KI-1103

Fits: B, C, & G

Replaces: RAM 213358 & Seals 211614

Price: $110.00

B,C,CA Motor Weight Bushings

Description: Allis Chalmers reproduction motor weight bushings. Sold in pairs. Comes primered.

Item #: KI-1049

Fits: B, C, & CA

Replaces:

Price: $26.00

B,C,&CA Brake Adjusting Screw

Description: Allis Chalmers reproduction bake adjusting screw 7/16X20 nf thread, 3" long. This screw adjusts the brakes shoes. Made in the USA. Comes natural finish.

Item #: KI-1129

Fits: B, C, & CA

Replaces: 70213375

Price: $25.80

B Wire Cover

Description: Allis Chalmers reproduction wire cover. Covers light wire on rear end. Comes primered

Item #: KI-1040

Fits: B
Replaces:

Price: $16.00

B Front Axle Weight Hook

Description: Allis Chalmers reproduction front axle weight hook. 3/4"X7". Comes primered. Need 2 pcs. per weight. Weight hooks sold separately. Weights not included.

Item #: KI-1080

Fits: B

Replaces:

Price: $32.00

B Foot Rest Tube

Description: Allis Chalmers reproduction foot rest tube. Comes primered.

Item #: KI-1030

Fits: B

Replaces: 205646

Price: $48.00

B Fender Support Assembly

Description: Allis Chalmers refurbished fender support assembly. Original elbow reused, sand blasted and polished to match new angle. Hard to tell not original very few pits in elbow, sold in pair only. Comes primed.

Item #: KI-1139

Fits: B

Replaces: Part # 212660 Serial # 52718 & up (right hand)

Part # 212659 serial # 52718 & up (left hand)

Price: $150.00

B&IB Shutter Crank

Description: Allis Chalmers reproduction shutter crank. 4" long, internal thread 1/4 20 thread. Comes orange.

Item #: KI-1099

Fits: B & IB

Replaces:

Price: $24.95

B&IB Rear Axle Nut Washer

Description: Allis Chalmers reproduction rear axle nut washer. 1-1/2" heavy. Natural finish.

Item #: KI-1053

Fits: B
Replaces: 222232

Price: $8.00

B Rear Axle Nut

Description: Allis Chalmers reproduction rear axle nut. 1-1/2X12 thread. Natural finish.

Item #: KI-1052

Fits: B

Replaces: 205519

Price: $44.00

B&IB Rear Axle Nut Wrench

Description: Allis Chalmers reproduction 1/2" thick X 20" long. Fits rear axle nut that has 2 flats. 4" off set handle. Laser cut. Comes primered.

Item #: KI-1111

Fits: B & IB

Replaces: 205519

Price: $70.00

Miscellaneous Tractor Parts

Description: Allis Chalmers reproduction Pintle hitch plate. Sold separately, 2 required for tractor. comes primered.

Item #: KI-1065

Fits: IB

Replaces: 210861

Price: $32.00

Hood Strap Screw Set

Description: Allis Chalmers reproduction fly wheel cover. Comes primered.

Item #: KI-1027

Fits: G
Replaces: 800388

Price: $20.00

G Fan Shaft Drive

Description: Allis Chalmers reproduction fan shaft drive. 18-1/2" long. Machined for Press fit.

Item #: KI-1134

Fits: G
Replaces: 800417 Serial # up to 29036

Price: $59.00

C&IB Cross Support

Description: Allis Chalmers reproduction cross support. Comes primered.

Item #: KI-1072

Fits: C, IB AFTER SN# 1001

Replaces: 210956

Price: $54.00

Description: Allis Chalmers reproduction front axle pin repair kit. Pivot pin must be cut off you axle and replacement must be welded on. Bracket will bolt in place. Pin is high alloy steel for long wear. Comes primered.

Item #: KI-1108

Fits: CA

Replaces: Bracket 225272 & Pivot Pin 222723

Price: $87.00

CA Front Axle Pivot Pin Repair Kit

Description: Allis Chalmers reproduction throttle lever. 6-7/8" long, 3/4" wide, .104" thick. Comes primered.

Item #: KI-1070

Fits: B SN: 101 & up, IB SN: 1001 & up, C & CA

Replaces: 207542 & 211268

Price: $23.00

 

B Thermostat Plate

Description: Allis Chalmers reproduction thermostat plate. Stainless Steel. Won't rust out.

Item #: KI-1039

Fits: B, C, CA, B125, IB, & H

Replaces: 209718

Price: $16.00

B,C,CA,&IB Throttle Rod Pin Control Rod

Description: Allis Chalmers reproduction frame. Comes primered. Very nice. If you are looking into truck freight the weight is 110 lbs. The skid dimensions are 42X68X10. Pick up location is 2348 E. Kammerer rd. Kendallville, IN 46755. This is a commercial site with loading available.

Item #: KI-1041

Fits: IB

Replaces: 210430

Price: $850.00

Tool Box Door With Hinge & Clip

Description: Allis Chalmers reproduction shroud assembly (tool box) door with hinge and clip. Comes primered.

Item #: KI-1005

Fits:

Replaces:

Price: $18.00

G Fuel Tank

Description: Allis Chalmers reproduction steel fuel tank, Sealed with red coat. This tank is closest to original on the market. Dishes ends, if you have an original cap it lines up the same way. Tank is grooved around the ends. Hard to tell it's not original. Made of 18 ga. steel. Comes primered. 

Item #: KI-1043

Fits: G
Replaces: 800070

Price: $304.00

G Fan Shaft Bearing (Pulley End)

 

Description: Allis Chalmers replacement g fan shaft bearing pulley end. Has outside snap ring. New.

Item #: KI-1116

Fits: G
Replaces: 800421

Price: $45.90

Description: Allis Chalmers knob for final drive clutch lever. 3/8X24 thread- 1-3/8 diameter.

Item #: KI-1048

Fits: CA

Replaces:

Price: $11.00

B, IB, C, CA, & G Steering Bushings

 

Description: Allis Chalmers reproduction steering shaft tube bushing. Opaque green. 1.433" O.D., .750" I.D.,.813.

Item #: KI-1068

Fits: B, IB, C, CA, & G All with ross steering box

Replaces: 210475

Price: $23.00

B,IB,C,&CA Throttle Lever

Description: Allis Chalmers reproduction hood strap screw set. Comes with 2 screws and 2 washer blocks.

Item #: KI-1124

Fits: B, B125. IB, H, C, WD, WD45, WD45 DIESEL, WC: 7430 & UP & WF: 1904 & UP

Replaces: 202132

Price:$ 21.80

G Throttle Lever

G Hydraulic Cylinder Kit

Description: Allis Chalmers reproduction hydraulic cylinder kit for large ram assembly AC # 800700. High grade stainless steel shaft.

Item #: KI-1104

Fits: G

Replaces: Ram 800778, Packing 222677, plunger bushing 223499

Price: $141.50

G Gas Line

G Flywheel Cover

G Crank Hole Casting

Description: Allis Chalmers reproduction final drive clutch lever. Knob included. Comes primered.

Item #: KI-1028

Fits: CA
Replaces: 206456

Price: $96.00

G Spark Plug Wire Loom Holder

Description: Allis Chalmers reproduction spark plug wire loom holder. Comes primered. Sold separately 2 required.

Item #: KI-1018

Fits: G
Replaces: BRACKET 800260 & GROMMET 800261

Price: $32.00

Description: Allis Chalmers reproduction gas line. Tube assembly with 2 nuts and double flared 1/4" tube.

Item #: KI-1086

Fits: G

Replaces: 800066

Price: $19.00

G Fan Shaft Bearing (fan end)

Description: Allis Chalmers replacement g fan shaft bearing fan end. Has outside snap ring. New.

Item #: KI-1117

Fits: G
Replaces: 800420

Price: $45.90

CA Drive Clutch Knob

CA Final Drive Clutch Lever

IB Frame

Description: Allis Chalmers reproduction pedal shaft. 11-5/8" x 7/8" C.R. shaft. 1 cotter key hole, 2 tapered holes. All 3 in line. Fits exact like original. Comes primered. 

Item #: KI-1098

Fits: G

Replaces: 800000

Price: $58.25

G Instrument Panel

Description: Allis Chalmers reproduction foot rest. 25-1/2" long. Made of C.R. Steel. Comes primered.

Item #: KI-1096

Fits: G
Replaces: 800083

Price: $56.50

G Foot Rest

Description: Allis Chalmers reproduction crank hole casting. Made of bronze.

Item #: KI-1081

Fits: G

Replaces: 800086

Price: $26.00

Description: Allis Chalmers reproduction throttle lever. 6-3/4" long, 3/4" wide, .104 thick

Item #: KI-1069

Fits: G
Replaces: 800149

Price: $23.00

G Pedal Shaft

Description: Allis Chalmers reproduction stainless steel brake pin. Won't rust. 6 1/2" long. Sold in pairs. Natural Finish

Item #: KI-1047

Fits: WD, WD45, D17 UP TO SN#42000

Replaces: 217599, 232801, 70217599, 70232801

Price: $50.00

IB Pintle Hitch Plate

Description: Allis Chalmers reproduction instrument panel. Laser burned out of 14 ga. steel.. Heaver than original. Comes primered.

Item #: KI-1021

Fits: G

Replaces: 800124

Price: $38.00